Chimney brick replacement with matched mortar in West Tampa

What white deposits on the chimney tell you

Efflorescence is the white bloom that salts leave on brick. The Brick Industry Association says it takes three things together, namely salts that can dissolve, water that stays on them long enough to dissolve them, and a route through the masonry that carries the solution out to the face.

Efflorescence can usually be removed by dry brushing, and BIA advises against washing it off except in warm, dry weather, since the extra water can bring more salts out. More important than removing it is asking why it keeps coming back, because persistent efflorescence points to water still getting in.

We note where the deposits sit and trace them back toward the source during the inspection.

Scheduling brick work around heat and sun

Fresh mortar needs time to cure, and drying too fast weakens it. According to the National Park Service, keeping the wall between 40 and 95 degrees Fahrenheit guards against freezing and against water leaving too quickly, and repointing is best done in shade, out of strong sunlight, particularly in hot weather.

We plan brick and joint work with that in mind, working in shade where we can and protecting fresh work from direct sun and rain. That can mean scheduling one face of the chimney for a particular time of day.

Questions worth asking before approving brick work

A clear brick repair estimate answers practical questions. How many bricks, or what area, will be replaced? What brick and mortar are proposed, and how close will the match look? What caused the damage, and is that cause part of the repair?

It should also say how loose material and debris will be handled and what protection will be in place below the chimney. Our estimates answer these in writing before you approve anything.

Why homeowners choose our team for chimney brick repair

Our local, family-owned team inspects the chimney free, explains which bricks have failed and why, and puts the repair and its price in writing. We replace failed units with care for the masonry around them and use mortar suited to the chimney.

Our workmanship warranty and 100% satisfaction guarantee both cover the work, and if you approve the brick work within 72 hours of the free inspection, you save 10%.