Fixing cracked chimney crowns in Pebble Creek
Written options after a roof-level look at no charge, and an open flue covered at the end of each work day.
- Family owned and operated
- Same-day service available
- No hidden fees
- Workmanship warranty
Contents
Chimney Services
How Our Pros Repair Chimney Crowns in Pebble Creek
Same-day service is available when the schedule allows, and the crown inspection is free.
A mortar wash and a real crown are different things
Some chimney tops were finished with a thin layer of mortar troweled over the bricks and sloped toward the edge. That mortar wash looks like a crown from the ground, but it is thin, usually unreinforced and made of a mix meant for the joints between bricks. Brick Industry Association guidance notes that mortar washes may be less durable than a properly designed cap.
Our pros tell you which one your chimney has. A sound mortar wash can sometimes be sealed for a while, and a cracked, crumbling one is usually replaced with a formed crown that has real thickness, an overhang and a drip edge. You see the difference in the estimate before anything is decided.
When the crown has to be replaced
A crown gets replaced when it is broken through, has lost chunks at the edge, has separated from the brick or was never more than a thin wash. The old crown is removed down to sound masonry, the top course of brick is checked and repaired, and a new crown is formed with slope, overhang, a drip edge and a bond break at every flue.
Brick Industry Association guidance favors reinforcement in a cast crown to control shrinkage and thermal cracking, with more steel in the overhang, and it warns against feathering the edge thin. Our specialists build to those details, and you see the crown design in the estimate before work starts.
How a crown rebuild day goes
A rebuild starts with roof protection and safe access. The old crown is broken out in pieces and lowered by hand. The top of the masonry is cleaned and repaired, forms are set with the overhang and drip built in, and the bond break goes around each flue before the new crown is placed and finished to its slope.
The fresh crown then needs time to cure, and our team explains any limit on using the fireplace while it does. Before leaving, they clean up, check the flue tiles and the cap and walk you through what was done.
Patching a broken crown edge
A crown that is sound across the top but has lost a piece at one corner can sometimes be repaired locally. The loose material is cut back to solid concrete, the area is cleaned and a repair material suited to crown work is built up to the original profile, with the drip edge carried through the new edge.
Thin patches feathered over a broken edge tend to pop off, which is why Brick Industry Association guidance warns against feathered crown edges. Our pros tell you when a patch is sound engineering and when the crown needs replacing, and they price both honestly when either could work.
On any service we offer
Give the go-ahead on a crown repair within 72 hours of your free inspection and save 10%.
What's Included
What Shapes Your Crown Repair Price
- Crown surface, edges and overhang
- Coating, patch or rebuild options
- Crown thickness and edge profile
- Old coatings checked for lifting
Our Services
More Help for Your Pebble Creek Fireplace
-
-
-
-
-
More about chimney crown repairEverything we do in Pebble Creek
Proudly American
A clear scope, an agreed price and workmanship we stand behind.
Give the Crown the Slope It Needs
Cracks on top or damp by the fireplace in Pebble Creek? Describe what you see and we will set up a visit.
Your request is confirmed
Our team will contact you to arrange the appointment.