Gas fireplace repair and tune-ups in Valrico
Pilot out, clicking with no flame or a dead remote? Our local pros find the fault on your model and fix it, starting with a free inspection.
- Family owned and operated
- Same-day service available
- No hidden fees
- Workmanship warranty
Contents
Our Services
Getting Your Gas Fireplace Running Again in Valrico
Every repair we make in Valrico is matched to the model on your rating plate and tested before we leave.
Checking the switch side of the circuit
On a millivolt system, the wall switch, remote receiver or thermostat closes the circuit that tells the valve to open the main burner. The service manual includes a test for this, jumping the switch terminals at the valve for a moment, which shows whether the fault sits in the control or in the valve itself.
Corroded terminals, loose wire nuts and long runs of thin wire can drop enough voltage to leave the burner dark while the pilot keeps burning. Our pros clean, tighten or replace the control wiring as the test shows, and the jumper never stays in place after testing.
Natural gas or propane, as the plate says
A fireplace is set up at the factory for one gas, and its burner orifice, pilot and valve settings follow that choice. Running a unit on a gas other than the one on its plate is unsafe, and switching between natural gas and propane is done only with the maker's approved kit by a qualified technician.
Our specialists confirm the gas type during the free inspection in Valrico and order parts for that configuration only. If your fuel supply is changing, we tell you whether your model has an approved kit before anything else is planned.
Leak-checking every fitting we touch
Any time a gas connection is loosened or replaced, the joint is tested before the fireplace is relit. Manufacturers call for a non-corrosive leak-check solution on the connections and note that fittings can work loose even in shipping, so a new part gets the same attention as an old one.
Our pros test each joint they have disturbed, rinse off the solution and relight the fireplace only once every connection holds. If the supply piping itself needs work beyond the fireplace connection, we tell you, and that work is arranged separately.
New sounds from a gas fireplace
Some sounds are part of normal running, such as the soft rush of the burner lighting or the hum of a blower. A new rumble from the burner, a squeal from the fan or a loud pop at ignition is different and deserves a look.
Our pros listen with the fireplace running and trace the sound to the burner, the ignition or the fan. A delayed or rough light-off is treated as a safety fault and fixed before the fireplace goes back into use in your home.
On any service we offer
A tune-up is 10% off for 72 hours after your free inspection.
Free Inspection
What Your Free Gas Fireplace Inspection Covers
- Pilot flame shape and how it wraps the sensors
- Thermocouple or thermopile millivolt output
- Control module response and lockout behavior
- Burner ports and air passages
Our Services
More Help for Your Valrico Fireplace
-
-
-
-
-
-
More about gas fireplace repair and serviceEverything we do in Valrico
Specialized Services
Individual gas fireplace repair and service Jobs
Get Your Gas Fireplace Working in Valrico
Tested, priced and repaired, with every fitting leak-checked and a 100% satisfaction guarantee on the visit.
Your request is confirmed
Our team will contact you to arrange the appointment.