
Leaking chimney flashing fixed in West Tampa
Corrosion-resistant metal, matched fasteners and laps that point downhill on every chimney we flash in West Tampa.
- Family owned and operated
- Same-day service available
- No hidden fees
- Workmanship warranty
Contents
Our Services
How We Rebuild Chimney Flashing Layer by Layer
Local flashing pros, upfront pricing and a 100% satisfaction guarantee on every roof line we repair.
Step flashing along the sides of the chimney
On a shingle roof, the sides of the chimney are usually flashed with step flashing: short bent pieces woven in with each course of shingles, so every piece sheds onto the shingle below it. Section R905.2.8.3 of the Florida residential code accepts either step flashing or one continuous L flashing along the sidewalls.
Step pieces that were face-nailed, skipped or cut short leave a path at every course. Our team lifts the shingles along the side, replaces the pieces that failed and weaves new ones in the same way the roof was built, then closes the side with counter flashing.
Laps that point the right way
Flashing is laid the way shingles are. Each higher piece goes over the lower one, so water always crosses a lap from the top and keeps moving. Technical Note 19B asks for at least two inches of lap where flashing is installed in sections, with the higher piece over the lower.
A lap installed backward catches water and feeds it under the metal. It can look neat from the ground and still leak in every storm. Checking the direction and length of each lap is part of the free inspection our team does on chimneys in West Tampa before quoting a flashing repair.
What the attic can tell you
If you can reach the attic safely, look at the framing beside the chimney after a rain. Dark or damp wood, water lines on the rafters or a wet patch of insulation next to the masonry help show where water is coming in.
Tell us what you saw when you arrange the visit, even if it is only a darker patch of wood. Our team combines it with what we find on the roof, and the inspection costs you nothing either way.
Finishing the ceiling after the leak stops
A water stain stays after the leak behind it is fixed. Drywall and plaster also need time to dry before painting, or the stain can bleed back through the new coat.
Our team fixes the chimney side first and checks in once the next rains have passed without a new mark. Interior repairs can then go ahead on a dry ceiling, and you avoid repainting over a leak that is still active.
On any service we offer
Book within 72 hours of the inspection and the 10% off goes on your estimate.
Free Inspection
What Your Free Flashing Inspection Covers
- Step flashing along both sides
- Metal type and signs of corrosion
- Mortar joints along the flashing line
- Storm collar on a metal chimney
Our Services
More Help for Your West Tampa Fireplace
-
Chimney Chase Repair Repair the enclosure around the chimney while respecting the pipe system and tracing the water damage that affected it. Learn more
-
Chimney and Fireplace Inspection Find out what needs attention, what remains uncertain and which next steps fit your fireplace before choosing repairs. Learn more
-
Chimney Liner Installation and Relining Give the exhaust passage a lining chosen for the fireplace, the chimney and the way the system will be used. Learn more
-
Fireplace Repair and Service Restore damaged fireplace components with repairs selected for the construction you actually have. Learn more
-
Spalling Brick Repair and Chimney Brick Replacement Replace failed chimney bricks with suitable material and address the conditions affecting the surrounding masonry. Learn more
-
Chimney Chase Cover Replacement Replace the weather cover over your framed chimney enclosure without overlooking the pipe, collar or structure beneath it. Learn more
More about chimney flashing repairEverything we do in West Tampa
Keep Rain Out of Your Ceilings
The inspection is free, the price is upfront and every decision is yours.
Your request is confirmed
Our team will contact you to arrange the appointment.