
Stucco chimney repair that fixes the cause in Progress Village
Free inspection, upfront pricing and a 100% satisfaction guarantee, with 10% off stucco work booked within 72 hours of the inspection.
- Family owned and operated
- Same-day service available
- No hidden fees
- Workmanship warranty
Contents
Our Services
Inside a Stucco Chimney Repair in Progress Village
Our specialists cut back to sound edges, build proper coats and keep every patch damp while it cures.
Why a patch should not lap over old stucco
Feathering a patch out over the surrounding stucco looks tidy on the first day and fails at its thin edges soon after. The Park Service's brief is direct about it, saying the new stucco should not overlap the old.
Our pros build each patch flush within its squared edges and match the finish at the surface, so there is no thin rim to crack or peel. Where scoring lines exist on the chimney, repairs end on those lines so the joint is hidden.
Letting trapped water drain out at the base
On framed exterior walls, the Florida residential code calls for a corrosion-resistant weep screed at the bottom of the stucco, placed no lower than 4 inches above soil or 2 inches above paving, so trapped water can drain out.
Stucco that has been run down into soil or mulch, or a screed that is buried or clogged, holds water in the wall. Our specialists check the base of a framed chimney and tell you when the screed or the grade around it needs attention.
Dampening the masonry before a patch
Dry block or brick pulls water out of fresh stucco before it can cure, which weakens the bond. The Park Service's brief calls for wetting masonry or wood lath before patching, while metal lath is left dry.
Our specialists dampen the backing so it is moist without standing water, then apply the first coat. That small step is why a patch stays put years later.
A repair mix that suits the old stucco
Stronger is not always better in stucco. The International Masonry Institute asks for a repair mix with similar strength, density, porosity and water absorption to the existing stucco, and the Park Service warns that rigid portland cement patches do not suit soft lime-based stucco.
Our pros look at the age and hardness of your chimney's stucco before choosing a mix. A patch that is much harder than its surroundings tends to crack at its edges and trap moisture beside it, the opposite of what a repair should do.
On any service we offer
Patch or restucco, either is 10% off booked within 72 hours of the check.
Free Inspection
Inside a Free Stucco Chimney Inspection
- Chase cover on framed chimneys
- Chalking, peeling or blistering
- Plants and vines touching the chimney
- Curing and weather plan for the repair
Our Services
More Help for Your Progress Village Fireplace
-
Chimney Crown Repair Repair the masonry top around the flue and choose sealing or replacement based on its actual condition. Learn more
-
Chimney Waterproofing Reduce water absorption through suitable masonry while repairing open defects before treatment. Learn more
-
Fireplace Installation Create a new fireplace with a suitable chimney system, room layout and finish plan established before construction. Learn more
-
Chimney Chase Repair Repair the enclosure around the chimney while respecting the pipe system and tracing the water damage that affected it. Learn more
-
Chimney Chase Cover Replacement Replace the weather cover over your framed chimney enclosure without overlooking the pipe, collar or structure beneath it. Learn more
-
Electric Fireplace Installation Plan the appliance, power and finished position together for an electric fireplace that suits the room. Learn more
More about stucco chimney repairEverything we do in Progress Village
Get Your Stucco Chimney Repaired in Progress Village
It starts with a free tap-and-look inspection, and the choice of repair is yours.
Your request is confirmed
Our team will contact you to arrange the appointment.