Rotted chimney chases repaired in Ruskin
A free chase inspection first, and a repair that closes every layer from framing to siding.
- Family owned and operated
- Same-day service available
- No hidden fees
- Workmanship warranty
Contents
Chimney Services
How Our Pros Repair Chimney Chases in Ruskin
Local and family-owned, our team repairs chimney chases in Ruskin with written prices before work starts.
Where the chase meets the roof
The joint between the chase and the roof takes water from the whole slope above it. Section R703.4 of the Florida residential code calls for corrosion-resistant flashing at wall and roof intersections, applied shingle-fashion so water is turned out. On a chase that means step flashing woven into the shingles and turned up the wall, with the barrier and siding lapped over it.
A missing piece, lifted shingles or siding that sits down on the roofing can let water run straight into the framing. Our pros check the flashing on every side of the chase and repair it along with the siding, so the roof joint and the wall close together. If the roof itself needs more than the chase area, you hear that too.
Chases with no fireplace inside
Some homes carry a chimney-shaped chase with no fireplace and no pipe inside it, built for the look of the roofline. It still has a cover, siding, flashing and framing, and it rots the same way when water gets in. Because nobody uses it, the damage can go unnoticed until a ceiling stain appears.
Our pros repair decorative chases the same way as working ones. They find the water path, replace the rot, close the walls and seal the top. If you are unsure whether your chase holds a chimney, the free inspection answers that first.
Why wet wood in a chase keeps getting worse
Rot is a fungus, and the USDA Forest Products Laboratory explains that decay fungi need wood that stays wet, while wood kept dry does not decay. A chase that takes on water in every storm keeps its sheathing and studs damp long enough for decay to start and spread, often out of sight behind siding that still looks sound.
That is why stopping the water comes first in every chase plan our team writes. New wood in a chase that keeps getting wet is only a head start for the next round of rot, while new wood in a chase that stays dry has what it needs to stay sound.
Stains, mold and rot are three different findings
Dark marks on chase sheathing can be old water staining on sound wood, surface mold on damp wood or real decay that has softened the fibers. Only decay means the wood has lost strength and has to come out.
Our pros tell them apart with a probe, a moisture reading and a close look, so sound wood stays in place and only damaged material is replaced. That keeps the repair as small as the damage allows.
On any service we offer
Say yes to the chase repair within 72 hours of your free inspection and save 10%.
What's Included
Everything Reviewed Before the Chase Is Opened
- Water entry points traced from the cover down
- Siding, trim and corner joints on every face
- Siding or stucco matched to the house
- Paint and caulk condition on every face
Our Services
More Help for Your Ruskin Fireplace
-
-
-
-
-
-
Proudly American
A clear scope, an agreed price and workmanship we stand behind.
Stop the Water Getting Into Your Chase
Soft boards outside or stains inside by the fireplace? Let us know and we will set a visit in Ruskin.
Your request is confirmed
Our team will contact you to arrange the appointment.